Kreativwand Logo
Deutsch / Englisch

Work flow - Tiled walls without joints

  1. Use sandpaper to remove any splashes of paint or silicone residue or clean any other stubborn residues (must be free of grease and dust)
  2. Apply undercoat/primer once – allow to dry
  3. Apply undercoat/primer again – allow to dry
  4. Fill joints with regular putty (we recommend ready-mixed putty) (fill twice if necessary) Sand back to obtain a smooth surface. Apply undercoat/primer (max 1m2), scatter granules on the wet primer – allow to dry
  5. Wipe off excess
  6. Seal twice
Back to the overview