Kreativwand Logo

Work flow - Tiled floor with joints

  1. Use sandpaper to remove any splashes of paint or silicone residue or clean any other stubborn residues (must be free of grease and dust)
  2. Apply undercoat/primer once – allow to dry
  3. Apply undercoat/primer (max. 1m²), scatter granules on the wet primer, allow to dry
  4. Wipe off excess – seal
  5. Scatter more on the sealant if necessary (spots)
  6. Wipe off again (possibly sand back) – seal three times
Back to the overview